Blog
Workshop updates, design deep-dives and answers to the questions we hear most often.
Latest postWorkshop updates
We commissioned two additional 5-axis trunnion cells in our Suzhou workshop this quarter, adding ~600 machine hours per week of contour and multi-face work.
Read the articleAll categories
We commissioned two additional 5-axis trunnion cells in our Suzhou workshop this quarter, adding ~600 machine hours per week of contour and multi-face work.
Read updateThe annual surveillance audit closed with no major or minor non-conformances. Documentation traceability and FAI review were both highlighted as strengths.
Read updateIt is not a PDF with check marks. Here is the line-by-line breakdown of what we measure, how we measure it, and what we ship with every PO.
Read guideA 0.6 mm wall in 6061 looks fine in CAD and breaks in machining. Here is the rule of thumb we use, with worked examples for aluminium, stainless and plastics.
Read guideThey look identical on a drawing but machine, finish and cost completely differently. A practical guide for engineering teams that need to choose quickly.
Read guideFor some parts, full-batch inspection is the right call. For others, in-process sampling cuts cost without raising risk. A decision framework.
Read guideA +/- 0.001 mm callout is meaningless if the datum scheme is wrong. We walk through how to specify tolerances your supplier can actually hold, and quote you once.
Read guide316L vs 17-4 PH vs 304. Which one survives passivation, autoclave cycles and your DFM review without surprise adders.
Read guideStill have a question?
Use the quote form to send a drawing and a written question. We reply with both an answer and a fixed quote, usually within one business day.
Send us a drawing ↗