최신 글Workshop updates
Q2 2026 capacity update: two new 5-axis cells online
We commissioned two additional 5-axis trunnion cells in our Suzhou workshop this quarter, adding ~600 machine hours per week of contour and multi-face work.
본문 읽기전체 카테고리
최신순으로 정리한 전체 글입니다.
Q2 2026 capacity update: two new 5-axis cells online
We commissioned two additional 5-axis trunnion cells in our Suzhou workshop this quarter, adding ~600 machine hours per week of contour and multi-face work.
업데이트 보기ISO 9001:2015 surveillance audit passed with zero findings
The annual surveillance audit closed with no major or minor non-conformances. Documentation traceability and FAI review were both highlighted as strengths.
업데이트 보기What our first-article inspection report really contains
It is not a PDF with check marks. Here is the line-by-line breakdown of what we measure, how we measure it, and what we ship with every PO.
가이드 보기Designing for CNC: the wall-thickness rule that saves a part
A 0.6 mm wall in 6061 looks fine in CAD and breaks in machining. Here is the rule of thumb we use, with worked examples for aluminium, stainless and plastics.
가이드 보기6061 vs 7075 aluminium: how to pick the right alloy
They look identical on a drawing but machine, finish and cost completely differently. A practical guide for engineering teams that need to choose quickly.
가이드 보기When in-process CMM actually pays for itself
For some parts, full-batch inspection is the right call. For others, in-process sampling cuts cost without raising risk. A decision framework.
가이드 보기Tolerances on the drawing vs tolerances on the shop floor
A +/- 0.001 mm callout is meaningless if the datum scheme is wrong. We walk through how to specify tolerances your supplier can actually hold, and quote you once.
가이드 보기Stainless grades that pass medical device review
316L vs 17-4 PH vs 304. Which one survives passivation, autoclave cycles and your DFM review without surprise adders.
가이드 보기