CNC machining for communications equipment: RF housings, filter cavities, heat sinks and antenna brackets. Define mating-face flatness, cavity geometry, grounding contacts and coating masks before selecting the machining and inspection route.

Applications

What we make for communications

Satellite Payload Components

For satellite payload hardware, we review mass-sensitive geometry, thermal interfaces, assembly datums and traceable drawing control. For communications hardware, geometry is often part of the electrical and thermal performance—not only the enclosure shape. We identify the interfaces that must remain controlled through machining, finishing and final assembly.

Before release, confirm the primary datum scheme and the interfaces that transfer load or positioning into the next assembly.

RF shielding enclosure and waveguide flange

RF Shielding & Filter Cavities

For RF cavities and shields, we focus on internal geometry, mating faces, grounding continuity and surface requirements that affect signal paths. For communications hardware, geometry is often part of the electrical and thermal performance—not only the enclosure shape. We identify the interfaces that must remain controlled through machining, finishing and final assembly.

The operating environment is converted into a practical review of materials, surfaces, sealing and handling before the route is released.

5G base station heat-sink and cold plate

5G Base Station Hardware

For base-station enclosures and heat-sink hardware, we coordinate thermal contact areas, outdoor exposure, fastener patterns and installation access. For communications hardware, geometry is often part of the electrical and thermal performance—not only the enclosure shape. We identify the interfaces that must remain controlled through machining, finishing and final assembly.

We identify the features that must align with adjacent electronics, fixtures or enclosures and define how they will be checked.

Satellite Ground Station

For ground-station structures, we review antenna alignment features, large-frame assembly references, cable passages and maintainability. For communications hardware, geometry is often part of the electrical and thermal performance—not only the enclosure shape. We identify the interfaces that must remain controlled through machining, finishing and final assembly.

The review also covers installation access, tolerance build-up and the dimensions most likely to affect field assembly.

RF test fixture and measurement equipment

RF Test & Measurement Fixtures

For RF test fixtures, we protect connector locations, repeatable locating features, probe access and wear-prone mating surfaces. For communications hardware, geometry is often part of the electrical and thermal performance—not only the enclosure shape. We identify the interfaces that must remain controlled through machining, finishing and final assembly.

We agree which contact areas, interfaces and visible surfaces need focused process control and order-specific inspection evidence.

Microwave waveguide components and bends

Microwave Waveguide Assemblies

For waveguide assemblies, we review internal contours, flange alignment, sealing faces and cleanliness needs before final assembly. For communications hardware, geometry is often part of the electrical and thermal performance—not only the enclosure shape. We identify the interfaces that must remain controlled through machining, finishing and final assembly.

The final review links the critical geometry to a workable machining sequence, measurement approach and delivery documentation scope.

How we work

Materials, tolerances, collaboration

Which components can be reviewed?

Tecpreva reviews revision-controlled drawings for RF housings, filter cavities, heat sinks and antenna brackets. Geometry, material, volume and acceptance criteria determine project suitability; the industry label alone is not a qualification.

Material and finish selection

Consider aluminum for housings and thermal paths, copper or brass for specified conductive features. Specify the exact grade, condition, finish standard, coating thickness and protected surfaces. Do not substitute a material or change a functional surface without approval.

What should the RFQ include?

Send the 2D drawing and STEP model, revision, quantities, critical features, destination and inspection plan. For this application, focus on mating-face flatness, cavity geometry, grounding contacts and coating masks. Identify any special testing, cleanliness or customer documentation requirements separately.

How is sample-to-production consistency controlled?

Agree the first-article acceptance process, datum strategy, inspection coverage and batch identification. Use approved drawings and samples as controlled references. Confirm any certification, regulatory, leak-test or performance-test requirement before accepting the order.

Drawing review

Discuss Communications machining requirements

Send the current drawing revision, STEP model, material grade, quantity and inspection scope. Engineering sends an initial response within one business day and confirms manufacturing assumptions after drawing review.

Request a manufacturing review

Protect the geometry that carries signal, heat and alignment.